8 Channel Video Fiber Optic Transceiver

1.Auto compatible with PAL, NTSC/SECAM
2.Stand-alone or rack-mounted Module
3.Surface mounted
4.Fiber Optic Transceiver-8CH

8 Channel Video Fiber Optic Transceiver

10-Bit Digital TransmissionAuto compatible with PAL, NTSC & SECAMCompatible with IEEE 802.3 EthernetOn-panel DIP switch selection of RS-422, RS-485, Manchester/BiphaseWide optical dynamic range  No EMI, RFI or ground loops   Strong anti-interference and high protection of privacy Dense structure for easy installation   With Hot Plugging, no need shut-down maintainance  Surge protection and auto recovery

Model No.	APG-VT/R80000-10000-SSF	8CH Video
	APG-VDT/R81000-12000-SSF	8CH Video + 1CH Reverse Data
	More Setting Optional
Video	Compatibility	PAL/NTSC/SECAM
	input/output voltage	1Vp-p (75ohm unbalanced)
	Bandwidth	5KHz ~ 7.5MHz
	Differential Gain	< 1%
	Flatness	<1dB
	Differential Phase	< 0.7o
	Signal-to-Noise Ratio (SNR)	> 67dB
Audio	Transmission	duplex
	PCM Encoding:	16bit @ 48k
	Bandwidth	10Hz ~ 24KHz
	Max. input/output voltage	2Vp-p
	Signal-to-Noise Ratio(SNR)	>75 Db
Data	Data Rate	0~115.2 kbps
		0~100Mbps(Ethernet)
	Formats	RS-232/RS-422/RS-485, Mancheste
	Bit Error Rate	<10-9
Ethernet	Protocol	apply for IEEE802.310/100Base-T
Optical	Fiber Type	Multi-mode	Single Mode
	Wavelength	850nm/1310nm	1310nm/1550nm	DFB
	Output Power	-10 dBm	-5 dBm	0 dBm
	Receiver Sensitivity	-22 dBm	-28 dBm	-28 dBm
	Max. Optical Loss	-12 dBm	-23 dBm	28 dBm
General	Mean Time Between Failures(MTBF)	> 100,000 hours
	Operating Temperature	-30oC ~ +70oC
	Storage Temperature	-40oC ~ +85oC
	Relative Humidity	0% to 95%, (non-condensing)
	Dimension	240×150×35mm
	Weight	700g
	Power Supply	DC 5V 2A
LED Indicator		Power On
		Optical link loss
		Data in/out put Presence
		Video in/out put Presence
		Ethernet
Connector	Optical	FC
	Video	BNC 75 Ohm BNC (Gold Center Pin)
	Audio	RJ45