- Amplifiers[1]
- Other Audio & Video Equipments[1]
- Connectors[10]
- Control Cables[5]
- Electrical Wires[10]
- Other Wiring Accessories[1]
- Testing Equipment[2]
- CCTV Camera[10]
- CCTV DVR[2]
- CCTV System[1]
- Other Surveillance Products[4]
- Communication Cables[10]
- Fiber Optic Equipment[10]
- Other Telecommunications Products[6]
- Telecom Parts[9]
- Other Hand Tools[10]
CE Certified PTZ Control Multi-Meter and Optic Power Meter, Security CCTV Tester
1.3.5"TFT LCD, CCTV system installation
2.PTZ Control, Optic Power Meter
3.Sample Available
4.Multimeter Security CCTV Tester
CE Certified Multi-Meter and Optic Power Meter, PTZ Control Security CCTV Tester
Feature:
• High precision optical power meter
• High precision full-featured Digital Multi-meter
• optical power meter, PTZ Control
• Network Cable testing, Color image sending
• Surveillance transmission channel testing
• Video attenuation testing
• DC12V power supply for cameras
• OSD Menu,Standby for 11 hours.
Specification:
Model
| APG-VTESTPRO-120D |
Video test | |
Signal mode | NTSC/PAL (Auto Adjust) |
Video Output Mode | 1.0 Vpp |
Display | 3.5 inch TFT-LCD, 960 x 240 resolution |
LCD adjust | Adjustable brightness, contrast, color of LCD |
Video IN/OUT | 1CH Input & 1CH Output |
Video Level Test | |
Level test | Video signals measured in IRE or mV |
Power Output | |
Power output | DC12V, 1A |
Audio Test | |
Audio input | 1CH Audio input |
PTZ controller | |
Communication | RS232, RS422 simplex and RS485 |
PTZ Protocol | Compatible with more than 20 protocols such as PELCO-D/P, Samsung, Panasonic, Lilin, Yaan, etc. |
Baud Rate | 150,300,600,1200,2400,4800,9600,19200bps |
Digital Multimeter | |
Multi-Meter | Voltage, current, resistance and capacitance measuring, continuity testing, diode testing. |
Laser power meter test | |
Wave length, power range, response, optical interface, lock show testing | |
Color image generator | |
Video signal generator | Send the PAL, NTSC standard color image bar signal by video out port, support 7 modes. |
UTP Network Cable test | |
Cable test | Test any 2 or more cable, it will display the connected order and number on screen. |
Protocol data capturing | |
Protocol data capturing | Can receive, display the RS485/RS232 protocol code date which sent by control equipment. |
Power | |
Power Adapter | DC 5V(2A) |
Battery Power supply | built-in 3.7V Li-battery, capacity for 3000mAh |
battery charging | Need 3-4 hours, can normally used for about 11hours. |
Power save function | Low power consume, auto holding state |
Other Parameters | |
Operation setup | Chinese, English OSD Menu(optional) |
Auto holding state | OFF/5-60Minutes |
Audio for keyboard | ON/OFF |
working condition and standard | |
Work Temperature | -10---+50 degree |
Work Humidity | 30%-90% |
Dimension/Weight | 170mm x 99mm x 48mm / 293g |